Talk about (almost) anything
by Hark0 » Fri Apr 25, 2014 11:06 am
Hi @rodot...
Only for curiosity...
The Gamebuinos are manufactured on EU or China?
TIA, Hark0
-
Hark0
-
- Posts: 55
- Joined: Wed Apr 09, 2014 4:45 am
- Location: Cornella de Llobregat, Barcelona
-
by ripper121 » Fri Apr 25, 2014 12:43 pm
Hand soldered and flashed by Rodot in France
Where the PCB is made i don´t know.
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
by Hark0 » Fri Apr 25, 2014 2:23 pm
Thanks!
-
Hark0
-
- Posts: 55
- Joined: Wed Apr 09, 2014 4:45 am
- Location: Cornella de Llobregat, Barcelona
-
by rodot » Fri Apr 25, 2014 3:01 pm
I never said the PCB was hand soldered... that's not possible with 800 units to make!
The PCB are manufactured and partially assembled in China by Pick&Place robots, and I finish to assemble them (screen, battery, buttons, case, bootloader, SD card) here in France. If the PCB were manufactured in France it would cost at least 100€ per Gamebuino
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by adekto » Fri Apr 25, 2014 3:10 pm
sadly thats the case in eu right now, everything is so dam expensive
-
adekto
-
- Posts: 448
- Joined: Tue Feb 25, 2014 9:47 pm
- Location: belgium
by rodot » Fri Apr 25, 2014 3:17 pm
...but don't worry, Chinese people at the factory will breathe less toxic fumes and get more money from Gamebuino that I will!
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by yodasvideoarcade » Sun Apr 27, 2014 2:05 pm
Haha, that's a good point!
-
yodasvideoarcade
-
- Posts: 102
- Joined: Sat Apr 19, 2014 10:48 am
- Location: Frankfurt/Germany
-
by Hark0 » Wed Apr 30, 2014 6:11 am
rodot wrote:I never said the PCB was hand soldered... that's not possible with 800 units to make!
The PCB are manufactured and partially assembled in China by Pick&Place robots, and I finish to assemble them (screen, battery, buttons, case, bootloader, SD card) here in France. If the PCB were manufactured in France it would cost at least 100€ per Gamebuino
Thanks for the explanation... I'm one of
http://zxuno.speccy.org (ZX Spectrum on FPGA) team member and we are interested on some info about good prices for manufacturing PCB's...
-
Hark0
-
- Posts: 55
- Joined: Wed Apr 09, 2014 4:45 am
- Location: Cornella de Llobregat, Barcelona
-
by inversesandwich » Thu Jun 05, 2014 10:12 am
Hark0 wrote:Thanks for the explanation... I'm one of
http://zxuno.speccy.org (ZX Spectrum on FPGA) team member and we are interested on some info about good prices for manufacturing PCB's...
SeeedStudio and iTeadstudio are pretty cheap.
-
inversesandwich
-
- Posts: 32
- Joined: Sat Apr 19, 2014 10:34 pm
- Location: United Kingdom
-
Return to General forum
Who is online
Users browsing this forum: No registered users and 72 guests