SD card, does it poke out?

[zerosimms]

Out of curiosity, does anyone know if the SD card will poke out when it's inside the gamebuino or will it sit flush?

[adekto]

its micro sd it has to be flush

[zerosimms]

Thanks adekto

Makes getting it in and out of the pocket a lot easier

[Myndale]

Actually it's a spring-loaded socket so the card extends about 2 mm out, which it needs to do so that you can remove it by pressing down.

[adekto]

can you make a picture since now im not sure if its flush with the pcb or not

[Myndale]

Posting links because the images are too big to inline:

http://imgur.com/8wdjLX9,U3iG2rL#0
http://imgur.com/8wdjLX9,U3iG2rL#1

[zerosimms]

That's not bad actually, I guess a case would allow you to streamline it more if you so wish.

[rodot]

Here are picture of gamebuino rev1 (early bird's version). The micro is protected by the acrylic case.

gamebuino_rev1_front.jpg (77.11 KiB) Viewed 6228 times

gamebuino_rev1_back.jpg (87.71 KiB) Viewed 6228 times

[zerosimms]

Perfect! Thanks for the screenies!