Gamebuino on Proteus

[Hark0]

Hi!

A fast question...

Someone have a Gameduino implemented in Proteus ?

[rodot]

I released the 3D files for everybody to be able to design their own case, and the schematics if you want to make a proto-buino. I don't think I will release the PCB layout files, it would make it too easy for people to manufacture counterfeits. Sorry :/

[Hark0]

I understand...

[Hark0]

Hi!

I make my own try to emulate Gamebuino with Proteus.

I'm using a 3310 Nokia Device driver... I not find 5110 library for proteus.

I just add Atmega, 7 buttons and display...

I loaded ALL examples yet compiled form Github (Games to put on SD card folder).

Allways I show the same display...

Captura de pantalla 2014-04-20 a la(s) 20.37.25.png (67.12 KiB) Viewed 6969 times

What are wrong?!?!

I just only want to emulate the hardware for develop my own tests... not for make an Gamebuino (I waiting for one... )

Thanks in advance.

[DFX2KX]

Hi!

I make my own try to emulate Gamebuino with Proteus.

I'm using a 3310 Nokia Device driver... I not find 5110 library for proteus.

I just add Atmega, 7 buttons and display...

I loaded ALL examples yet compiled form Github (Games to put on SD card folder).

Allways I show the same display...

Captura de pantalla 2014-04-20 a la(s) 20.37.25.png

What are wrong?!?!

I just only want to emulate the hardware for develop my own tests... not for make an Gamebuino (I waiting for one... )

Thanks in advance.

That's neat that you have the hardware modeled in there. Though, it looks like the demo start up screen, did you try installing a simulated sd card, or Pong?

[Hark0]

Well, I have added a SDcard to proteus...

But, when I boot the virtual machine... it's "hangs" at startup screen... Not read the SD card...

I think the problem are in bootloader... How simulate/burn to "virtual" device?

hmmm

[civi]

@Hark0: hi, I think the problem is with the drivers as you have to install the drivers before simulation so you can also download the drivers from Labcenter’s website as it is the only special requirement for VSM simulation. Hopefully it will work.

[Hark0]

@Hark0: hi, I think the problem is with the drivers as you have to install the drivers before simulation so you can also download the drivers from Labcenter’s website as it is the only special requirement for VSM simulation. Hopefully it will work.

I try it....

Today I have received some parts for make some arduino "ideas"...