My Gamebuino clone + 3D printed case

[Drek]

Hello, finally I made my own clone of Gamebuino. I also designed for my clone 3D printed case.
Thank you everyone, who helped me during work on clone.
Some pictures:








P.S.: Added multiplayer test picture.

[erico]

Uau, very unique style you have there!
Ports are on different places, are you using them for some specific reasons?

[jicehel]

great, but maybe a little too fat but nice and interesting approach

[Drek]

Thank you.
I have not used I2C ports yet. However, I have a little bug with permanent light up RX and TX LEDs. If you mean an arrangement of the A B C buttons, so this arrangement was more suitable for me.

Yes, it's a little thicker, but it's because the battery is 8.3mm thick. If the battery was a little bit thicker, I would have to a little deepen the bottom cover. The current thickness of my clone (fully assembled) is 23.75mm.

Sorry for my English.