Gamebuino forum

Hello this page http://gamebuino.com/ says that : "Gamebuino is compatible with any I2C module. You can find some of them from Seeed studio’s Grove system or Tinkerkit. They even have the right connector! Official Gamebuino modules should be available soon too." so I bought some grove seeed studio modules and cables and the connector is smaller than the gamebuino's one, there is too much space between the pins on the gamebuino :/

Is it normal or did I waste money ? I really want to use these modules and I thought they were compatible... Is there any way to fix this ? I don't want to break the gamebuino bending the pins :/

Well In fact It seems it connects on the side, I will try one of the modules and tell you

You may need this: http://www.seeedstudio.com/depot/Grove- ... -1020.html
I2c is on top of gamebuino

Oh okay thanks, I'm disappointed, I thought I could just connect the grove modules to the gamebuino since the page said the connectors were the same

And I believe seeed studio delivery time Is kind of long since they ship from china

damn

Yes, for ordering from china you need a lot of patience
I found a local (say: German) reseller and ordered there.

Well no in fact it looks that it could connect on the top but the size is wrong so maybe your câbles could do the trick if they are not too big

viewtopic.php?f=17&t=3328
In this thread there is a picture of a connected i2c module

OOh thanks so this guy is using some cable that looks like the one you told me to use ! I'll definitely get some !
Found a reseller here in france : http://boutique.semageek.com/fr/311-5x- ... melle.html
Shipping fees are kind of high (6.5 euros) but I think it's worth it !