MakerBuino Clone PCB

Show us your Gamebuino clone or the last module you made.

MakerBuino Clone PCB

Postby NullMember » Thu Dec 08, 2016 7:11 pm

Hi everyone
First of all i'm sorry for my english.

I see MakerBuino a few days ago in somewhere (i can't remember). I have following GameBuino for a long time. But i'm not make any clones (i don't know why. Actually i love making something on proto board. Anyway) So i redraw schematics and PCB. It's my first schematic and PCB drawing. If you see any wrong thing or if it's illegal (MakerBuino shared schematics but i don't know about this) please let me know. Here is photos:

Complete.JPG
Complete.JPG (203.24 KiB) Viewed 11105 times

Top.JPG
Top.JPG (112.71 KiB) Viewed 11105 times

Bottom.JPG
Bottom.JPG (87.67 KiB) Viewed 11105 times
NullMember
 
Posts: 3
Joined: Thu Dec 08, 2016 6:45 pm

Re: MakerBuino Clone PCB

Postby NullMember » Thu Dec 08, 2016 7:11 pm

Schematic, Eagle and Gerber files

Schematic.zip
I know my schematic is not best :)
(89.91 KiB) Downloaded 708 times
Attachments
OpenGameBuinoGerber.zip
(148.63 KiB) Downloaded 880 times
OpenGameBuinoEagle.zip
(46.77 KiB) Downloaded 693 times
NullMember
 
Posts: 3
Joined: Thu Dec 08, 2016 6:45 pm

Re: MakerBuino Clone PCB

Postby albertinjo » Fri Dec 09, 2016 11:17 pm

Well done!
It is really cool to see that MAKERbuino is encouraging people to MAKE - that was the whole point.
No, this is not illegal in any way, actually this is what open-source technology is all about.

sincerely,
Albert Gajšak (aka. albertinjo) - the creator of MAKERbuino
User avatar
albertinjo
 
Posts: 98
Joined: Wed Mar 26, 2014 2:26 pm

Re: MakerBuino Clone PCB

Postby tranvannhancu » Sun Apr 16, 2017 12:41 pm

Hi, have you tested the PCB yet? Does it work fine?
I'm going to use your Gerber files to order a real PCB so I need to ask for your confirmation first.
Anyway, have a good day :)
tranvannhancu
 
Posts: 3
Joined: Sat Apr 15, 2017 5:34 pm

Re: MakerBuino Clone PCB

Postby NullMember » Thu Jun 08, 2017 9:41 am

@tranvannhancu PCB not tested yet.
I do this job for University Robot community. They not interested at all. Sorry about that.
NullMember
 
Posts: 3
Joined: Thu Dec 08, 2016 6:45 pm


Return to Hardware Gallery

Who is online

Users browsing this forum: No registered users and 1 guest