DIY Gameduino on Arduino Uno
Mon Jul 03, 2017 3:56 am
Good day.
I also made a diy gamebuino.
bootloader from rodot's file going to arduino uno.
same schematics.
but sd card doesn't flash after pressing C button.
LEFT button is pressed already, i removed the LEFT button wiring &
ground but at the SETTINGS, LEFT cursor is enable already.
I uploaded the LOADER.ino in the arduino uno & my sd card is read, still
my LEFT cursor is a problem.
Do I missing something?
I also made a diy gamebuino.
bootloader from rodot's file going to arduino uno.
same schematics.
but sd card doesn't flash after pressing C button.
LEFT button is pressed already, i removed the LEFT button wiring &
ground but at the SETTINGS, LEFT cursor is enable already.
I uploaded the LOADER.ino in the arduino uno & my sd card is read, still
my LEFT cursor is a problem.
Do I missing something?
Re: DIY Gameduino on Arduino Uno
Mon Jul 03, 2017 6:31 am
This is the actual photo.
No pressing at the LEFT button but still it was recognized as ON.
My setup is Arduino Uno + SD Card Shield + N5110 Breakout Module + Buttons + Speaker
No pressing at the LEFT button but still it was recognized as ON.
My setup is Arduino Uno + SD Card Shield + N5110 Breakout Module + Buttons + Speaker
- Attachments
-
- DIY Gamebuino in Arduino Uno R3
- IMG_3027.jpg (47.26 KiB) Viewed 8792 times