DIY Gameduino on Arduino Uno

Show us your Gamebuino clone or the last module you made.

DIY Gameduino on Arduino Uno

Postby chris » Mon Jul 03, 2017 3:56 am

Good day.
I also made a diy gamebuino.
bootloader from rodot's file going to arduino uno.
same schematics.
but sd card doesn't flash after pressing C button.
LEFT button is pressed already, i removed the LEFT button wiring &
ground but at the SETTINGS, LEFT cursor is enable already.
I uploaded the LOADER.ino in the arduino uno & my sd card is read, still
my LEFT cursor is a problem.
Do I missing something?
chris
 
Posts: 2
Joined: Fri Jun 30, 2017 1:42 am

Re: DIY Gameduino on Arduino Uno

Postby chris » Mon Jul 03, 2017 6:31 am

This is the actual photo.
No pressing at the LEFT button but still it was recognized as ON.
My setup is Arduino Uno + SD Card Shield + N5110 Breakout Module + Buttons + Speaker
Attachments
IMG_3027.jpg
DIY Gamebuino in Arduino Uno R3
IMG_3027.jpg (47.26 KiB) Viewed 7095 times
chris
 
Posts: 2
Joined: Fri Jun 30, 2017 1:42 am


Return to Hardware Gallery

Who is online

Users browsing this forum: No registered users and 17 guests

cron