Show us your Gamebuino clone or the last module you made.
by HWHardSoft » Thu Jul 31, 2014 6:57 pm
jonnection wrote:Hey HWHardSoft
I see you are using a normal SD card like me.
How is the bootloader/loader.hex working on your prototype ? Any issues ?
After some problems with flashing of the bootloader it works fine... I've tested 5 different sd cards
128MB Alfaya MMC --> no function
1GB Platinum --> works
2GB OnMemory Silver --> works
2GB Toshiba --> works
4GB Toshiba --> no function
-
HWHardSoft
-
- Posts: 25
- Joined: Sun Apr 27, 2014 8:46 pm
-
by HWHardSoft » Fri Aug 01, 2014 1:56 pm
The
Duinocade DIY kit is available for pre-order now:
- Duinocade DIY kit
- Duinocade_diy_kit.jpg (103.34 KiB) Viewed 6461 times
I will deliver the first kits probably in the middle of September.
-
HWHardSoft
-
- Posts: 25
- Joined: Sun Apr 27, 2014 8:46 pm
-
by ripper121 » Tue Aug 05, 2014 8:25 am
Wow *-*.
Good German work xD.
Is it possible to buy a compatible sd card from your Shop?
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
by HWHardSoft » Tue Aug 05, 2014 6:44 pm
ripper121 wrote:Wow *-*.
Good German work xD.
Is it possible to buy a compatible sd card from your Shop?
Yes I want to sell compatible (and pre programmed) sd cards in my shop also. But it's hard to find a source for cheap and compatible cards.
-
HWHardSoft
-
- Posts: 25
- Joined: Sun Apr 27, 2014 8:46 pm
-
by ripper121 » Thu Aug 07, 2014 8:39 am
I think the SD cards dont have to be very cheap.
You can ask rodot were he ordered the cards.
Is there a pinout for spi and i2c?
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
by HWHardSoft » Thu Aug 14, 2014 7:36 pm
ripper121 wrote:I think the SD cards dont have to be very cheap.
You can ask rodot were he ordered the cards.
Is there a pinout for spi and i2c?
I've ordered different cards for test... we will see.
Here a new artwork - Space Invaders - for the Duinocade
- Duinocade_spaceinvaders_artwork.jpg (34.08 KiB) Viewed 6386 times
-
HWHardSoft
-
- Posts: 25
- Joined: Sun Apr 27, 2014 8:46 pm
-
by HWHardSoft » Sun Sep 07, 2014 2:43 pm
The Duinocade DIY kits are available in my
webshop. Here is a picture of my 'mass' production for Duinocade pcbs:
- Duinocade pcbs in production
- Duinocade_production_small.jpg (169.69 KiB) Viewed 6359 times
-
HWHardSoft
-
- Posts: 25
- Joined: Sun Apr 27, 2014 8:46 pm
-
by ripper121 » Mon Sep 08, 2014 9:33 am
Is the DIY kit smd mounted or do i have to solder the smd parts?
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
by HWHardSoft » Mon Sep 08, 2014 2:34 pm
The pcb comes already assembled with all parts and pre programmed ATMEGA. You have only to solder the cable to the Joystick unit...
-
HWHardSoft
-
- Posts: 25
- Joined: Sun Apr 27, 2014 8:46 pm
-
by ripper121 » Wed Sep 10, 2014 8:12 am
Nice this goes to my christmas wish list
-
ripper121
-
- Posts: 224
- Joined: Fri Apr 04, 2014 2:02 pm
- Location: Germany
Return to Hardware Gallery
Who is online
Users browsing this forum: No registered users and 5 guests