Page 1 of 1

FM Radio with RDA5708m I2C module

PostPosted: Wed Oct 14, 2015 7:38 pm
by Sutchig
Made a little fm tuner app for the rda5708m module with support for rds. (From seeedstudio, I think it's ok to mention the manufacturer here as it's referenced at gamebuino.com too)
Screenshot: Image
Src/hex: https://github.com/scmar/Radio?files=1

Left/right is search for station,
A: stop search
B: toggle mute
Up/down: volume

Re: FM Radio with RDA5708m I2C module

PostPosted: Wed Oct 14, 2015 8:38 pm
by erico
Looks nice!
What is that cable/extension on the left side?

Re: FM Radio with RDA5708m I2C module

PostPosted: Fri Oct 16, 2015 9:27 am
by Sutchig
the cable on the left is a 9DOF-Sensor board. (accel, magnet and gyro) It fits between the backcover and pcb :)
sadly this module and the fm-tuner doesn't work together, althought they have different i2c-addresses. if they are both plugged in, only the sensorboard is found. :(

Re: FM Radio with RDA5708m I2C module

PostPosted: Mon Oct 19, 2015 1:50 pm
by erico
Nice!
Bad about them not working together.