I2C?

[Trinex]

I don't understand what I2C modules to get. They all look like they have a male connectors and no female ones. BTW What Wireless module was used in the release trailer. It would be nice to find the link. (TinkerKit doesn't load for me)

[rodot]

You can connect any I2C device to your Gamebuino. Gamebuino runs at 3.3V, so if you device runs at 5V you'll need some level shifting. Male or female doesn't really matter, just make sure to connect the same pins together : GND with GND, VCC with VCC, DATA with DATA and CLOCK with CLOCK (aka SCK for Serial CLock).