[SOLVED] I can't get the programmer to flash the bootloader.
Posted: Tue Jan 13, 2015 3:06 am
So, I've got a 'Deek-Robot' made TinyUSBISP programmer, standard 6 pin and ten pin layouts. It seems to have standard pinout, and pin one seems to match the the GB (it didn't fry the GB when I plugged it in, which is also a good sign)
However, I get
avrdude: Initilization failed, rc=-1
double check connections and try again, or use -F to override.
Overriding gives me a 0x0000 adress and tosses an error.
Any ideas? I bought the thing so I could finally update from my Indiegogo-era bootloader, and/or turn it into a permanant 3D printer controller. I didn't expect it to be this much work :\
However, I get
avrdude: Initilization failed, rc=-1
double check connections and try again, or use -F to override.
Overriding gives me a 0x0000 adress and tosses an error.
Any ideas? I bought the thing so I could finally update from my Indiegogo-era bootloader, and/or turn it into a permanant 3D printer controller. I didn't expect it to be this much work :\