[solved] Gamebuino not recognized by computer
Posted: Wed Jul 22, 2015 12:42 pm
So, today I received my second gamebuino (yay!) but I have the issue that it isn't recognized by the computer.
On my first gamebuino, which is working, this is what happens when plugging in:
RX and TX LEDs flash twice and then remain off, the battery charging LED is obviously on.
Then the arduino noticed the new port and automatically switches to /dev/USB1
On the new (not-working) one when i plug the usb in simply the RX and TX LEDs are constantly on and nothing else happens.
Perhaps there is a new USB chip?
EDIT: nevermind, using a different cable is working....weird
On my first gamebuino, which is working, this is what happens when plugging in:
RX and TX LEDs flash twice and then remain off, the battery charging LED is obviously on.
Then the arduino noticed the new port and automatically switches to /dev/USB1
On the new (not-working) one when i plug the usb in simply the RX and TX LEDs are constantly on and nothing else happens.
Perhaps there is a new USB chip?
EDIT: nevermind, using a different cable is working....weird