I received my gamebuino a few days ago. This morning I followed the getting started page on the wiki. I got down to the software setup. I installed the Arduino IDE and the gamebuino library. I copied the hardware and libraries folders into the Arduino folder. Everything was working there. The next step was to install the drivers. This is where my problem started. I followed the guide from the Arduino site. This did not work. I turned on my gamebuino, then plugged it into my laptop. Nothing. No other leds came on, no chime from windows. Nothing. I have used 4 different cables and 3 different usb ports. Still nothing. Nothing shows up in device manager. I am running windows 10. Please help me. I really want to start messing around with my gamebuino.
Thanks