Page 1 of 1

[MAKERbuino] Blank screen after correct start

PostPosted: Sun Jul 23, 2017 4:53 am
by EvilSnoopy
Hello,
I buildt my Makerbuino today and started it. It turned on but sound didn't work.
I followed the instructions and finished the "checkup wizard". After that I tried to start a game and the loading screen appeared. After about 20 seconds the screen turned blank and stayed in this stage. I tried every button and turn it off and on again but nothing worked.

Re: Blank screen after correct start

PostPosted: Sun Jul 23, 2017 3:08 pm
by bitfogav
Have you tried the reset function? with the Makerbuino turned off, Hold down button C whilst you turn the Makerbuino on, after a few seconds let go of button C. Wait 20-30 secs..

Re: Blank screen after correct start

PostPosted: Sun Jul 23, 2017 3:36 pm
by EvilSnoopy
Yes I tried this. It didn't work

Re: [MAKERbuino] Blank screen after correct start

PostPosted: Tue Jul 25, 2017 9:12 pm
by bitfogav
Have you checked you're SD Card and does it come with loads of games on it? I've read that people have been getting there makerbuinos with nothing on the SD Card..

Re: [MAKERbuino] Blank screen after correct start

PostPosted: Fri Jul 28, 2017 4:41 am
by EvilSnoopy
There were programs on the card. I also tried another sd card.