For problems with Gamebuino itself, NOT your project
by rodot » Tue Oct 11, 2016 7:42 am
If sometimes happen when they tighten the screw too much, but it won't happen in the new batches. I usually enclose a spare case with every Gamebuino, you didn't get one ?
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by RobyIndie » Tue Oct 11, 2016 8:15 am
rodot wrote:If sometimes happen when they tighten the screw too much
Haha, that's ironic as the back panel was almost completely unscrewed and was bouncing all around
But yes, I did get two brown spare panels, are those it?
-
RobyIndie
-
- Posts: 7
- Joined: Mon Oct 10, 2016 10:02 pm
by rodot » Tue Oct 11, 2016 8:44 am
Yes, you only have to remove the brown paper protection, or you can keep it and draw on it
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by RobyIndie » Tue Oct 11, 2016 9:05 am
rodot wrote:Yes, you only have to remove the brown paper protection
I swear I tried to do that over and over, I was starting to think it wasn't removable at all. Haha thank you
-
RobyIndie
-
- Posts: 7
- Joined: Mon Oct 10, 2016 10:02 pm
by rodot » Tue Oct 11, 2016 9:34 am
Yeah it's pretty hard to remove, the trick it to scratch one part with the corner of the other, so you don't scratch it as it's the same hardness
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by rodot » Tue Oct 11, 2016 9:38 am
Are there any cases that cover sides of the device, perhaps?
I feel like I could break it at any given time haha
Totally unrelated, but I'm the same guy from this post:
viewtopic.php?f=7&t=3505Assuming I make it to the Maker Faire, could I have a replacement top acrylic?
Let's not get
topics mixed up ^^
Well as a replacement case was already included why would want you yet another one ?
You can 3D print a case if you want, the 3D files of the Gamebuino PCB can be found in the
Hardware page.
I know the case of the Gamebuino is one of it's flaws, along with the screen. But worry not, it's going to
change.
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by RobyIndie » Tue Oct 11, 2016 10:01 am
rodot wrote:Well as a replacement case was already included why would want you yet another one ?
So that I could do as suggested and either let my girlfriend or little sister draw on the other one haha
Don't worry about it mate, and actually sorry that I even asked. I'm just nitpicking. Looking forward to seeing you this weekend if I can make it, and congratulations on the badass project and growth!
-
RobyIndie
-
- Posts: 7
- Joined: Mon Oct 10, 2016 10:02 pm
Return to Installation & Troubleshooting
Who is online
Users browsing this forum: No registered users and 1 guest