Modules, cases, buttons...
by spinal » Wed Oct 26, 2016 8:27 pm
I know there are a couple of posts about upgrading parts of the gamebuino, particularly the screen.
But have many people seriously considered possible screen/arduino combinations that would actually work? From what I have read, most color tft screens are too high resolution for cheaper arduino's to be able to use at a decent speed (color screens usually being 16bpp rather than 1bpp, so that would be 16 times the data needing to be sent.
What are peoples ideas on the subject?
-
spinal
-
- Posts: 22
- Joined: Thu Oct 20, 2016 7:39 pm
by rodot » Thu Oct 27, 2016 4:59 pm
I've
heard Arduboy is planning a color version, I wonder which screen/chip combo he's going to use
Tinycircuit's
tiny arcade has a color screen, but it's a really tiny OLED drivent by a SAMD21 (cortex M0+ running at 48Mhz).
Paul did some DMA optimized
screen library for his Teensy 3.1 which seems to run fast enough for gaming.
...or you could run it on a Rapsberry.
The question is how much is too much ?
-
rodot
- Site Admin
-
- Posts: 1290
- Joined: Mon Nov 19, 2012 11:54 pm
- Location: France
-
by spinal » Thu Oct 27, 2016 5:44 pm
I was half tempted with one of the piZero options, but then, I hate linux with a passion and nobody seems to have mad a bare-bones gaming OS for it. I've seen people using those tiny oled screens, I can't see the point, far too small no matter what the resolution.
-
spinal
-
- Posts: 22
- Joined: Thu Oct 20, 2016 7:39 pm
by Duhjoker » Wed Dec 21, 2016 8:10 pm
Dude!!!!!!!!! Really?!!!
Why send someone to a competitor when we have color here at Gamebuino. Now with added SD support. Besides arduboy is so not interested. I checked with them trying to get some advice for my library and I got no where.
I have a working library for color but need beta testers willing to buy thier own hardware the Library works with what follows...
Inhaos 220x176 LCD_2000_7775 full color
Teensy 3.2 or higher.... Get the 3.5 or 3.6 as they have built in SD card slots
Power supply like an adafruit powerboost 500
Battery 3.7 lipo ?????mAh
Buttons x12 tactile
Wire
Bread board
- Attachments
-
- gamebuinoAPcolorSD.zip
- (33.95 KiB) Downloaded 1219 times
-
Duhjoker
-
- Posts: 446
- Joined: Sat Jul 02, 2016 4:57 am
- Location: Where Palm trees grow
by curlyc » Sat Mar 04, 2017 1:30 am
Duhjoker wrote:Dude!!!!!!!!! Really?!!!
Why send someone to a competitor when we have color here at Gamebuino. Now with added SD support. Besides arduboy is so not interested. I checked with them trying to get some advice for my library and I got no where.
I have a working library for color but need beta testers willing to buy thier own hardware the Library works with what follows...
Inhaos 220x176 LCD_2000_7775 full color
Teensy 3.2 or higher.... Get the 3.5 or 3.6 as they have built in SD card slots
Power supply like an adafruit powerboost 500
Battery 3.7 lipo ?????mAh
Buttons x12 tactile
Wire
Bread board
wish i saw this before i instead purchased more parts for my 3d printer project, i may have to order more "junk" (as my boss calls it)
-
curlyc
-
- Posts: 3
- Joined: Sat Mar 04, 2017 1:20 am
Return to Hardware Development
Who is online
Users browsing this forum: No registered users and 2 guests