Show us your Gamebuino clone or the last module you made.
by Drek » Fri Oct 06, 2017 6:23 pm
Hello, finally I made my own clone of Gamebuino. I also designed for my clone 3D printed case.
Thank you everyone, who helped me during work on clone.
Some pictures:
![Image](http://i67.tinypic.com/2z8zxar.jpg)
![Image](http://i68.tinypic.com/2nvz61g.jpg)
![Image](http://i68.tinypic.com/jb5oxy.jpg)
![Image](http://i67.tinypic.com/1441tvr.jpg)
![Image](http://i68.tinypic.com/2q07gna.jpg)
![Image](http://i67.tinypic.com/1ylv91.jpg)
P.S.: Added multiplayer test picture.
Last edited by
Drek on Wed Dec 13, 2017 1:06 pm, edited 2 times in total.
-
Drek
-
- Posts: 4
- Joined: Wed Jul 20, 2016 9:15 am
- Location: Slovakia
by erico » Sat Oct 07, 2017 4:45 am
Uau, very unique style you have there!
Ports are on different places, are you using them for some specific reasons?
-
![User avatar](./download/file.php?avatar=293_1411019334.png)
erico
-
- Posts: 671
- Joined: Thu Mar 27, 2014 9:29 pm
- Location: Brazil
-
by jicehel » Sun Oct 08, 2017 10:02 am
great, but maybe a little too fat but nice and interesting approach
-
jicehel
-
- Posts: 21
- Joined: Thu Aug 10, 2017 10:25 pm
by Drek » Sun Oct 08, 2017 4:53 pm
Thank you.
I have not used I2C ports yet. However, I have a little bug with permanent light up RX and TX LEDs. If you mean an arrangement of the A B C buttons, so this arrangement was more suitable for me.
Yes, it's a little thicker, but it's because the battery is 8.3mm thick. If the battery was a little bit thicker, I would have to a little deepen the bottom cover. The current thickness of my clone (fully assembled) is 23.75mm.
Sorry for my English.
-
Drek
-
- Posts: 4
- Joined: Wed Jul 20, 2016 9:15 am
- Location: Slovakia
Return to Hardware Gallery
Who is online
Users browsing this forum: No registered users and 59 guests